STEP ONE
STEP TWO
Spray the Grout Brite™ Cleaner directly onto the grout joints.
Allow cleaner to penetrate dirt, soils and soap deposits.
(Average penetration time 1-3 minutes.)
Apply the Grout Brite™ Stain/Sealer, with the provided Pen Applicator.
Additional coats may need to be applied, depending on the porosity of the surface.
These additional coats may be applied immediately!
Scrub well with a white nylon bristle brush.
Rinse with plenty of fresh, clean water.
Wipe with a clean, dry cloth.
Let the surface dry thoroughly before proceeding to the next step of the process.
You may use your bath/shower 12 hours from when coats have dried to touch.
Refrain from cleaning for 48 hours.
Clean the tile surface with Grout Brite™ Prep. Cleaner.
Once your tiles are clean, be sure that the grout lines are completely dry before proceeding to the next step.
CLEAN UP
Use mild soap and warm water. Run warm water through the applicator tip and valve assembly until water runs clear. Then simply re-cap the applicator and store.