 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
FREQUENTLY
ASKED QUESTIONS (PAGE 2)
|
NEXT
PAGE
|
| 6.) How long does the process take to apply? |
| It depends on the condition of your grout lines and the severity of staining. But on the average, the 3 walls surrounding your bath tub, from start to finish will take 2-3 hours to complete. |
| 7.) How long do I have to wait before I can use it? |
The process is dry to the touch fairly quickly,
usually within 1-2 hours depending on temperature and humidity factors. It is dry to use in 12 hours and is cleanable in 72 hours. |
| 8.) Can I use the Grout Brite™ System on my floor grout? |
YES you can! Though the system was originally designed for wall grout,
it preforms extremely well on floor grout as well! |
| 9.) What makes YOUR system different from all the rest? |
The Grout Brite™ System is specifically designed
and formulated to penetrate into the grout, thus becoming part of it.
Most products on the market today are top coats or paints.
They only lay on the surface, creating a weak bond that will eventually
chip and peel off. Our system will not chip or peel since it is absorbed
into and becomes part of the grout. Our system is chemical, oil and solvent
resistant and is extremely difficult to stain or damage under normal
conditions and use. We also supply you with a Patent Pending specially
designed applicator
to apply our system, the others do not. |
| 10.) What if I have missing or cracked grout lines? |
We suggest that you replace missing grout with non-sanded
grout and skim over cracked grout lines. Let the new grout dry for 2 days before applying the Grout Brite™ System. |
